Suspension clamps are mainly used for overhead power lines. Wires are suspended from insulators or lightning conductors are suspended from pole towers through connection fittings.

Traditional malleable cast iron clamps have the disadvantages of large hysteresis loss, large hole current loss, and bulky products. The aluminum alloy clamp has the advantages of extremely small hysteresis loss and eddy current loss, light weight, and convenient construction. It meets the requirements of energy saving and consumption reduction in the national power grid transformation and construction.

XTS & CTS type suspension clamps for twin jumper conductor are adopted melleable iron casting & aluminum alloy, respectively. They are especially suitable for more than 110KV overhead transimission line; after thermal treatment, they are of hysteresis-free & energy-saving efficiency.

Wire Class		Wire Structure(Aluminum Ratio)	Percent
	ACSR (Steel core aluminum stranded wire)	>1.7	12
		4.0-4.5	18
		5.0-6.5	20
		7.0-8.0	22
		11.0-20.2	24
	Steel stranded wire	Ultimate strength 1176-1274	14
	Aluminum stranded wire		30

Type	IMG	Suitable for Wire Diameter Range (Including Wrapped)(mm)	Main Dimensions (mm)								Nominal Failure Load (kN)	Weight (kg)
			Φ	R	L	L1	M	C	h	H
XTS-2	IMG 1	25.0~31.0	18	16.0	200	56	16	19	62	77	40	5.0
XTS-2A	IMG 1	17.0~21.0	18	11.0	200	50	16	19	57	76	40	4.5
XTS-2B	IMG 1	21.0~27.0	18	14.0	200	52	16	19	59	77	40	5.0
CTS-2	IMG 2	17.0~27.0	18	14.0	200	52	/	/	55	70	40
CTS-5	IMG 2	24.0~34.0	18	17.0	200	30	/	/	55	70	40	3.0

1.XTS type clamp body and pressure plate are malleable cast iron or cast iron, gradually becoming larger, it is recommended to choose CTS type instead

2.CTS type clamp body and pressure plate are aluminum alloy, which has energy saving effect

3. The closed pin is made of stainless steel, and the rest are made of galvanized steel