AXS ADSS Double Suspension Clamp for Overhead Transmission Line

Classification:Preformed Optical Fittings

Inside Road & Administration Industry & Trading Garden,Houshan Industry Area,Fuzhou City,Fujian Province

0591-22806687 0591-22806697

0591-22806667

bs@china-grid.com.cn

Overview
Description:

Double suspension set for ADSS, adopting double-layer design, is consisted of structural reinforcing rod/outer structural reinforcing rod (dead end) in proper size and length, intended to pass axial load and disperse radial stress, to reach its inner reinforcing units through plastic jacket, so as not to impair the plastic jacket or inner optical fiber that is fragile and vulnerable. The suspension clamp has excellent anti-fatigue, including outer structural reinforcing rod (dead end)/structural reinforcing rod, two sets of suspension clamp, and matching connection hardware.

(Grip force is not less than 20% of the rated tensile strength of the cable)
Type Applicable Optical Cable Diameter
(mm)
Length of Outer Rods
(mm)
Length of Structural Reinforcing Rods
(mm)
Weight
(kg)
Fittings Matched
Yoke Plate Link Fittings
AXS0960 9.0-9.6 1800 2200 2.36 HPL-460 U-7
AXS1010 9.7-10.1 1800 2200 2.45 HPL-460 U-7
AXS1060 10.2-10.6 1800 2200 2.61 HPL-460 U-7
AXS1110 10.7-11.1 1800 2200 2.61 HPL-460 U-7
AXS1160 11.2-11.6 1800 2200 2.7 HPL-460 U-7
AXS1170 11.7-11.7 1800 2200 2.7 HPL-460 U-7
AXS1200 11.8-12.0 1900 2400 2.88 HPL-560 U-7
AXS1270 12.1-12.7 1900 2400 2.88 HPL-560 U-7
AXS1290 12.8-12.9 1900 2400 3.15 HPL-560 U-7
AXS1360 13.0-13.6 1900 2400 3.15 HPL-560 U-7
AXS1410 13.7-14.1 2100 2700 3.5 HPL-560 U-7
AXS1430 14.2-14.3 2100 2700 3.81 HPL-560 U-7
AXS1510 14.6-15.1 2100 2700 3.81 HPL-560 U-7
AXS1580 15.2-15.8 2100 2700 3.81 HPL-560 U-7
AXS1600 15.9-16.0 2100 2700 3.92 HPL-560 U-7
AXS1690 16.1-16.9 2400 3000 4.43 HPL-660 U-7
AXS1730 17.0-17.3 2400 3000 4.78 HPL-660 U-7
AXS1800 17.4-18.0 2400 3000 4.78 HPL-660 U-7
AXS1880 18.1-18.8 2400 3000 4.78 HPL-660 U-7
Notes:

1. The maximum single-sided overhang angle of a single suspension clamp is 15°-18°, and the maximum single-sided overhang angle of a double suspension clamp is 30°-36°.

2. The universal configuration of the connection fittings is U-7 and ZH-7. Please refer to the appendix for special connection fittings, and special instructions

3. All the products of the company are not listed above. If you have any requirements, please consult our technical department.

Contact Us
0591-22806687 0591-22806697
0086-13950298099
0591-22806667
Inside Road & Administration Industry & Trading
      Garden,Houshan Industry Area,Fuzhou City,Fujian Province
Sampras@china-grid.com.cn
Product Search

© CHINA-GRID POWER TECHNOLOGY CO.,LTD. All Rights Reserved. 闽ICP备16015067号-2