FZP Silicone rubber climbing umbrella skirt insulator is mainly used for porcelain sleeves such as pillars, switches, circuit breakers, voltage (current) transformers of 10-500kV substation, increasing its creepage distance, solving the problem that the original porcelain insulator has insufficient creepage distance and resistance to flashover. Poor characteristics to improve its stain resistance.

1. Using the climbing umbrella skirt, the creepage ratio is increased by 20%, and the pollution flash voltage is increased by more than 50%

2. with excellent water repellency, migration and electrical insulation, good resistance to pollution flashover

3. excellent resistance to atmospheric aging, Oxygen-resistant aging, high temperature resistance and lake remote performance

4. anti-leakage tracking, good resistance to electrical corrosion

5. electrical performance: one minute work dry tolerance voltage ≥ 45KV / piece

6. Wide applicability, simple installation and low cost

1. Determine the quantity and location of the installation according to the pollution level at the substation site to obtain the best results

2. Wrap the silicone rubber climbing skirt around the porcelain insulator pillar, and use the special glass glue or single-component silica gel to stick the opening part. You can place a climbing umbrella skirt at intervals of 2~3 porcelain climbing umbrella skirts

3. The installation of the silicone rubber climbing umbrella skirt is shown on the Instructions IMG

4. The creepage distance beyond the porcelain climbing umbrella skirt is known. The insulator must always have a creepage distance equal to or greater than the creepage distance required by the pollution level in the area